Digi TransPort WR11, User Manual

Page: 139 / 866

Use the command-line interface Using the CLI parameter tables in this guide
Digi TransPort WR Routers User Guide 139
gpio command: General Purpose Input Output (GPIO)
GPIO commands are necessary to configure a WR44, which has one Digital Input/Output port and
one Digital Input port. The gpio command configures an I/O port either as an input port or an
output port. For example:
The syntax of the command is as follows:
gpio [inout ON|OFF|input|output]
Display current status of ports
With no parameters, the gpio command displays the current status of the ports. For example:
gpio
Input(s):
in : OFF
Output(s):
inout : OFF
OK
Set the I/O port as an output
To set the I/O port to be an output:
gpio inout output
Input(s):
in : OFF
Output(s):
inout : OFF
OK
Command Description
gpio inout input Configures the I/O port as an input.
gpio inout output Configures the I/O port as an output.
gpio inout on Sets the I/O port to on when configured as an output.
gpio inout off Sets the I/O port to off when configured as an output.