Digi TransPort WR11, User Manual

Page: 629 / 866

Configure alarms Event Settings parameters
Digi TransPort WR Routers User Guide 629
Syslog Messages parameters
Besides logging events to an internal log file and to a file on a USB flash drive, the router can log
events to a Syslog server. To configure the router to send Syslog messages to a Syslog server , set the
following values in the web interface:
Send Syslog messages
When enabled, displays the following options:
Send a Syslog message when the event priority is at least n
The lowest-priority event that will generate a syslog message. For example, if this value is set to
6 , only events with a priority of 6 or lower ( 7 , 8 , or 9 ) will trigger an automated syslog message.
To disable syslog messages, set this value to 0 .
Send a maximum of n Syslog messages per day
Sets the limit on the number of syslog messages that may be sent during any 24-hour period.
The intention is to prevent excessive alerts being sent when the event trigger value is set to a
high priority/low value ( 1 , 2 , or 3 for example), such as a value that results in a large number of
syslog messages being generated. A maximum of 2147483647 Syslog messages can be sent in a
day.
n Syslog messages have been sent today
A status message that indicates how many Syslog messages have been sent in the last 24-hour
period.
Related CLI commands
.
Entity Instance Parameter Values Equivalent web parameter
event n syslog_trig 0-9 Send a Syslog message when the event priority is
at least n.
event n syslog_max 0-2147483647 Send a maximum of n Syslog messages per day.