Digi TransPort WR11 User Manual Download Page 439

Page: 439 / 866

Configure Virtual Private Networking (VPN)

IPsec parameters

Digi TransPort WR Routers User Guide

439

Advanced IKE parameters

Retransmit a frame if no response after n seconds

The amount of time, in seconds, that IKE will wait for a response from the remote unit before

transmitting the negotiation frame.

Stop IKE negotiation after n retransmissions

The maximum number of times that IKE will retransmit a negotiation frame as part of the

exchange before failing.

Stop IKE negotiation if no packet received for n seconds

The period of time, in seconds, after which the router will stop the IKE negotiation when no

response to a negotiation packet has been received.

Enable Dead Peer Detection

Enables Dead Peer Detection. For more information, refer to the

Configuration > Network >

IPsec > Dead Peer Detection (DPD)

page.

NAT Traversal Mode

Selects the NAT traversal mode for IKE/IPsec: Auto, Disabled, or Force. When one end of an IPsec

tunnel is behind a NAT box, some form of NAT traversal may be required before the IPsec tunnel

can pass packets. Turning NAT Traversal on enables the IKE protocol to discover whether or not

one or both ends of a tunnel is behind a NAT box, and implements a standard NAT traversal

protocol if NAT is not being performed. The version of NAT traversal supported is that described

in the IETF draft document

draft-ietf-ipsec-nat-t-ike-03.txt

Send INITIAL-CONTACT notifications

Enables INITIAL-CONTACT notifications to be sent.

ike

ipsecgroup

1, 2, 5

MODP Group for Phase 2

ike

ltime

1-28800

Renegotiate after h hrs m mins s secs
This CLI value is entered in seconds only.

Entity

Instance Parameter

Values

Equivalent web parameter

Summary of Contents for TransPort WR11


































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for TransPort WR11

Reviews:

Related manuals for TransPort WR11

Brands by name

Popular brands

Digi TransPort WR11, User Manual

Search results

Summary of Contents for TransPort WR11

Reviews:

Related manuals for TransPort WR11

Brands by name

Popular brands