Virtual Private Networks (VPN)
OpenVPN
IX10 User Guide
341
l
(Optional) Set the amount of time to wait for an initial connection to the
interface before this test is considered to have failed:
(config vpn openvpn client openvpn_client1 surelink target
0)> interface_timeout
value
(config vpn openvpn client openvpn_client1 surelink target
0)>
where
value
is any number of weeks, days, hours, minutes, or seconds, and
takes the format
number
{
w|d|h|m|s
}.
For example, to set
timeout
to ten minutes, enter either
10m
or
600s
:
(config vpn openvpn client openvpn_client1 surelink target
0)> interface_timeout 600s
(config vpn openvpn client openvpn_client1 surelink target
0)>
The default is 60 seconds.
l
other
: Allows you to test another interface's status, to create a failover or
coupled relationship between interfaces:
(config vpn openvpn client openvpn_client1 surelink target
0)> other
value
(config vpn openvpn client openvpn_client1 surelink target
0)>
If
other
is set:
o
Set the alternate interface to be tested:
i. Use the
?
to determine available interfaces:
ii. Set the interface. For example:
(config vpn openvpn client openvpn_client1 surelink
target 0)> other_interface /network/interface/eth1
(config vpn openvpn client openvpn_client1 surelink
target 0)>
o
Set the alternate interface's IP version. This allows you to determine the
alternate interface's status for a particular IP version.
(config vpn openvpn client openvpn_client1 surelink target
0)> other_ip_version
value
(config vpn openvpn client openvpn_client1 surelink target
0)>
where
value
is one of:
any
,
both
,
ipv4
, or
ipv6
.
o
Set the expected status of the alternate interface:
(config vpn openvpn client openvpn_client1 surelink target
0)> other_status
value
