Serial port
Configure UDP serial mode
IX10 User Guide
187
9. Expand
UDP Serial Settings
.
a. For
Local port
, enter the UDP port. The default is 4001 or serial port 1, 4002 for serial port
2, etc.
b. (Optional) For
Socket String ID
, enter a string that should be added at the beginning of
each packet.
c. For
Destinations
, you can configure the remote sites to which you want to send data. If
you do not specify any destinations, the IX10 sends new data from the last IP address and
port from which data was received. To add a destination:
i. Click
Add Destination
. A destination row is added.
ii. (Optional) For
Description
, enter a description of the destination.
iii. For
Hostname
, enter the host name or IP address of the remote site to which data
should be sent.
iv. For
Port
, enter the port number of the remote site to which data should be sent.
10. Click
Apply
to save the configuration and apply the change.
The
Apply
button is located at the top of the WebUI page. You may need to scroll to the top of
the page to locate it.
Command line
1. Select the device in Remote Manager and click
Actions
>
Open Console
, or log into the IX10
local command line as a user with full Admin access rights.
