Interfaces
Local Area Networks (LANs)
IX10 User Guide
127
4. Create the LAN or select an existing LAN:
n
To create a new LAN, for
Add interface
, type a name for the LAN and click
.
n
To edit an existing LAN, click to expand the LAN.
The Interface configuration window is displayed.
New LANs are enabled by default. To disable, toggle off
Enable
.
5. For
Interface type
, leave at the default setting of
Ethernet
.
6. For
Zone
, select the appropriate firewall zone. See
for further
information.
7. For
Device
, select an Ethernet device.
8. (Optional) Click to expand
802.1x
to configure 802.1x port based network access control.
The IX10 can function as an 802.1x authenticator; it does not function as an 802.1x supplicant.
a. Click to expand
Authentication
.
b. Click
Enable server
to enable the 802.1x authenticator on the IX10 device.
c. Type the
Server IP address
of the authentication server.
d.
Server Port number
defaults to
1812
. Type a new port number for the authentication
server if different than the default.
e. Type the
Server Password
for the authentication server.
f. Set the
Reauth
period.
g. (Optional) Click to expand
Accounting
.
h. Click
Enable server
to enable 802.1x authentication auditing on the IX10 device.
i. Type the
Server IP address
of the auditing server.
j.
Server Port number
defaults to
1813
. Type a new port number for the auditing server if
different than the default.
k. Type the
Server Password
for the auditing server.
9. Configure IPv4 settings:
a. Click to expand
IPv4
.
IPv4 support is enabled by default.
b. For
Type
, select
Static IP address
.
