Serial port
Configure Application mode
IX10 User Guide
171
b. (Optional) Enable monitoring of DCD (Data Carrier Detect) changes on this port:
(config)>path-parammonitor dcd true
(config)
14. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
15. Type
exit
to exit the Admin CLI.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
quit
to disconnect from the device.
Configure Application mode
Application
mode provides access to the serial device from Python applications.
To change the configuration to match the serial configuration of the device to which you want to
connect:
Web
1. Log into the IX10 WebUI as a user with Admin access.
2. On the menu, click
System
. Under
Configuration
, click
Serial Configuration
.
The
Serial Configuration
page is displayed.
Note
You can also configure the serial port by using
Device Configuration
>
Serial
. Changes
made by using either
Device Configuration
or
Serial Configuration
will be reflected in both.
3. Click the name of the port that you want to configure.