Diamond Aircraft DV 20 E 2022, Airplane Maintenance Manual

Page: 783 / 903

AIRCRAFT
DV 20 E AMM Wings
Doc # 4.02.25
Rev. 2
57-50-00
Page 203
15 Mar 2022
B. Install the Flap
Detail Steps/Work Items Key Items/References
(1) Put the flap in position on the airplane. Hold the flap.
(2) Install the pivot bolts in the hinges and the flap
horn.
Hold the flap. Make sure that there is a
gap of 3 - 5 mm (0.12 - 0.20 in) between
the flap and the aileron.
(3) Install the bolt which attaches the control rod to
the flap horn.
(4) Install the bushing Ream the bushing to Ø 9.525 (+0.010
and +0.050) after installation to fit
properly.
(5) Do a test for correct adjustment of the flaps. Refer to Section 27-50.
(6) Do an inspection of the flap controls which you
disconnected or adjusted.
(7) If necessary for your airworthiness authority, do
a second inspection of the flap controls.