Diamond Aircraft DV 20 E 2022, Airplane Maintenance Manual

Page: 295 / 903

AIRCRAFT
DV 20 E AMM Equipment/Furnishings
Doc # 4.02.25
Rev. 2
25-10-00
Page 201
15 Mar 2022
Maintenance Practices
1. General
The following maintenance practices describe how to remove/install the seats and other furnishings.
Refer to Chapter 25-60 for data about the ELT.
2. Remove/Install a Pilot’s Seat
A. Remove a Pilot’s Seat
Detail Steps/Work Items Key Items/References
(1) Release the press-studs which hold the seat
cushion and remove the seat cushion.
(2) Remove the boot for the control stick.
(3) Remove the five screws from the seat shell.
(4) Lift the seat a little:
S
Release the quick-release fastener for the
outer strap.
S
Move the inner strap through the hole in the
seat shell.
Take care not to loose the rubber strips
from the holes.
(5) Remove the seat shell.
B. Install a Pilot’s Seat
Detail Steps/Work Items Key Items/References
(1) Make sure that there are no unwanted items
below the seat.
(2) Make sure that the outer strap is in position in
the seat shell.
(3) Move the inner strap through the hole in the
seat shell.
Make sure that the rubber strips are in
position on the hole.
(4) Put the seat shell in position.
(5) Install the attaching screws.
(6) Install the boot for the control stick.
(7) Install the seat cushion.