Diamond Aircraft DV 20 E 2022, Airplane Maintenance Manual

Page: 659 / 903

AIRCRAFT
DV 20 E AMM
Standard Practices and
Structures
Detail Steps/Work Items Key Items/References
Doc # 4.02.25
Rev. 2
51-20-00
Page 219
15 Mar 2022
(1) Prepare the area(s) for the application of the
fire retardant paint, as follows:
S
If dirt or grease is present, wash the area
with clean carbon tetrachloride or acetone.
Wipe the area off immediately.
S
Abrade the surface with 280 grit sandpaper.
S
Remove the dust with a fully opened tack
cloth.
S
Cover the area(s) that will not be painted.
Use masking tape to hold the cover(s) in
place.
Make sure that you do not damage the
laminate. Only remove the transparent
top coat and the fire resistant paint.
WARNING: OBEY THE SAFETY PRECAUTIONS THAT FOLLOW WHEN YOU USE
PAINTS:
- USE SAFETY GOGGLES.
- USE SAFETY CLOTHING.
- DO NOT LET PAINTS TOUCH YOUR SKIN, EYES, OR MOUTH
- PAINTS ARE POISONOUS
- IF IRRITATION OCCURS, GET MEDICAL AID
- DO THE WORK IN AN AREA THAT HAS A GOOD FLOW OF AIR
- DO THE WORK IN AN AREA THAT DOES NOT HAVE SPARKS,
FLAME, OR HOT SURFACES.
- OBEY THE MANUFACTURER'S INSTRUCTIONS.
WARNING: YOU CAN CAUSE INJURY TO PERSONS AND/OR DAMAGE TO
EQUIPMENT IF ABOVE SAFETY PRECAUTIONS ARE NOT OBEYED