MCQ-PRO RFID Reader
— Installation and Tuning Manual Version 1.00
Page 77 of 89
Default Read
During an I-Code SLI-L/S default read, tags memory and optionally UID can be read.
To read tags UID, check “Read UID”. The UID and then memory blocks will be reported
sequentially.
To select which part of the memory should be read, enter the first block in “First block”
(decimal) field and the number of blocks in “Number of blocks” (decimal). Memory blocks
are reported sequentially.
Check “Fast Mode” to specify whether to use page inventory tag command (B0h) or fast page
inventory tag command (B1h). See I-Code SLI-L/S specifications for more information.
“Signal level threshold” permits to report a tag only if its signal level is greater or equal to this
threshold during asynchronous read. All tags will be reported if the threshold is set to 0.
When attempting to read blocks of memory that belong to password protected
pages, and password has not been logged in first, block content is reported as
“XX XX XX XX”.
9.8.2
Password tab
Figure 65: I-Code SLI-L/S panel (Password tab)
Summary of Contents for MCQ-PRO
Page 1: ...User Manual Version 1 00...
