MCQ-PRO RFID Reader
— Installation and Tuning Manual Version 1.00
Page 15 of 89
3.1.1
Selecting a Device
MCQ-Pro software can automatically discover and display RFID devices connected to your
computer’s serial port, USB port or connected to a TCP/IP network.
Discovered devices are displayed under “Discovered Devices” group. A same device can be
displayed one or more times depending on the number of communication interfaces
(Serial/USB, Ethernet) this device is available on. Prefer “Ethernet” interface when available
as it is the fastest communication interface.
You can refresh the “Discovered devices” at any time by clicking on “Discover Devices”.
Devices that have been already registered in MCQ-Pro software will appear under “Favorite
Devices” group. Favorite Devices are shortcuts to devices you are working often with and can
be managed using “Favorite Devices” panel. See Section 5 for more information.
Figure 6: Device Selection page
Select the device to use and click “Next >”. If necessary, this device will automatically be
added to your “Favorite Devices”.
Summary of Contents for MCQ-PRO
Page 1: ...User Manual Version 1 00...
