Dhollandia DH-L 3300 lbs, Installation Manual, Page: 73 / 82

72
DHOLLANDIA
B- If so equipped, connect the
battery cable to the incoming terminal of
the main battery switch.
Tighten the nut of the incoming pole of the
main battery disconnect switch by means
of a hexagonal key nr. 13.
Finish off the multi-cable entry seal as
explained above for the case without main
battery disconnect switch.
When mounting the cables, make sure the cables make a downward curb as they exit the control box, to allow water to drip off in a
natural way. Thus, you can easily prevent water ingress in the connections of the battery cables.
NOTICE
•
To ensure the reliability of the lift over many years, it is extremely important that the installer connects the battery cables to the
control boxes, heatshrinks and seals the connections with due care.
•
Insufficient torqueing of the connection bolts can cause overheating and short circuits. Improper sealing can cause water ingress,
and premature corrosion to the battery cable connection.
•
DHOLLANDIA disclaims liability for any personal injury or property damage that results from improper or negligent installation.