Dhollandia DH-L 3300 lbs, Installation Manual, Page: 65 / 82

64
DHOLLANDIA
16.3 ELECTRIC AND HYDRAULIC REQUIREMENTS
•
The applicable wiring diagrams are saved at the inside of the main external control box, and can be found there for reference.
•
A copy of the wiring diagrams can also be obtained from the national DHOLLANDIA distributor [see contact info on
page 4]; or downloaded from the DHOLLANDIA website:
www.dhollandia.com → Country & language selection → Downloads → Electrical & hydraulic wiring
diagrams → … select required diagram
•
Remark: the following cable sections are recommended (+) battery cables and (-) ground cables. Note: these are general data.
Subject to agreement with our order department, other configurations are possible.
Recommended cable sections for (+) battery cables and (-) ground cables
Size electric motor Cable section
500 W 16 mm² - 5 AWG
12V
●
1200 – 2000 W
1100 – 3300 lbs capacity / length ≤ 33 ft
1100 – 3300 lbs capacity / length 33 – 60 ft
Capacity > 3300 lbs
Length > 60 ft
3 AWG
1 AWG
0 (1/0) AWG
0 (1/0) AWG
24V
●
1200 – 2000 W
1100 – 4400 lbs / length ≤ 60 ft
Capacity > 4400 lbs
Length > 60 ft
3 AWG
1 AWG
1 AWG
24V
●
3000 W
Length < 60 ft
Length > 60 ft
1 AWG
0 (1/0) AWG
Long motor cycles > 25 sec (double deck, power down) 0 (1/0) AWG
•
Batteries and their charging system should be chosen to comply with the following minimum requirements:
Voltage System
12V 24V
Liftgate capacity
(lb / kg)
Electrical power
(Amp)
Battery
capacity
(Ah)
Generator
output
(A)
Electrical
power
(Amp)
Battery
capacity
(Ah)
Generator
output
(A)
≤ 1750 lbs / 750 kg 200 143 70 150 105 (2X) 70
≤ 2200 lbs / 1000 kg 250 143 70 200 105 (2X) 70
≤ 3300 lbs / 1500 kg 250 180 90 200 180 (2X) 90
> 3300 lbs / 1500 kg 250 180 110 250 180 (2X) 110
> 3300 lbs / 1500 kg
Frequent usage
300 220 110 300 220 (2X) 110