DH Instruments PPC2+, Manual

Page: 138 / 166

PPC2+™ Operation and Maintenance Manual
©2001 DH Instruments, Inc.
Page 130
4. Connect the calibration standard output to the PPC2+ rear panel TEST port (1/4 in.
NPT F).
8/@/< KZZVc Z\O]]_\O ^Y ^RO >/=> ZY\^ aS^RY_^ RK`SXQ K Z\O]]_\O ]_ZZVc O[_KV ^Y Y\
Q\OK^O\ ^RKX ^RO KZZVSON Z\O]]_\O MYXXOM^ON ^Y ^RO ]_ZZVc ZY\^ KXN 8/@/< MK_]O K
]_NNOXOb^O\XKVMRKXQOSXZ\O]]_\O.KWKQO^YSX^O\XKV::-MYWZYXOX^]MY_VN\O]_V^
3^S]RSQRVc\OMYWWOXNONaROX_]SXQKZS]^YXQK_QO^YMKVSL\K^O::-^RK^^RO::-
NS\OM^Z\O]]_\OMYX^\YVUOc]]OO=OM^SYXLO_]ON^YMRKXQO^ROZ\O]]_\O\K^RO\
^RKX^ROZS]^YXQK_QOMYX^\YV]c]^OW`KV`O]>ROZS]^YXQK_QO`O\XSO\MKX^ROXLO_]ON
PY\PSXOZ\O]]_\OKNT_]^WOX^^YPVYK^^ROZS]^YXSPXOMO]]K\c
5.2.4 RPT CALIBRATION USING CALTOOL FOR RPTS SOFTWARE
To calibrate PPC2+ using CalTool software (supplied on the General Accessories Disk), refer
to Sections 5.2.1, PRINCIPLE, 5.2.2, and 5.2.3 in this manual and then refer to the CalTool for
RPTs Software Manual (supplied on the General Accessories Disk).
5.2.5 EDITING AND VIEWING RPT CALIBRATION INFORMATION
m
PURPOSE
RPT calibration information fields include:
•
The calibration date.
•
The value of ZNATERR.
•
The value of PA.
•
The value of PM.
These fields can be viewed and/or edited. Viewing and editing calibration information is
range specific.
m
OPERATION
Select the desired range from the main run screen using the RANGE function. Then, to
view or edit calibration information, press [SPECIAL] and select <4Internal>,
<2Cal>,
<1RPT>. Select <1view> or <2edit>. The <1view> selection displays the
calibration information fields. The <2edit> function displays the fields and allows them to
be edited. The display is:
1. Edit field for calibration date if in edit mode.
2. Current RPT measurement range.
3. Edit field for value of ZNATERR if in edit mode.
2
3
ZNATERR: 0.0 Pa