Develop ineo 3320 User Manual Download

Page: 12 / 295

User's Guide

- 12 -

Selecting a location for the printer

CAUTION—POTENTIAL INJURY:

The printer weight is greater than 18 kg (40 lb) and requires two

or more trained personnel to lift it safely.

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan

to install any options, then leave enough room for them also. It is important to:

•

Set up the printer near a properly grounded and easily accessible electrical outlet.

•

Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN

Technical Committee 156 standard.

•

Provide a flat, sturdy, and stable surface.

•

Keep the printer:

- Clean, dry, and free of dust.

- Away from stray staples and paper clips.

- Away from the direct airflow of air conditioners, heaters, or ventilators.

- Free from direct sunlight and humidity extremes.

•

Observe the recommended temperatures and avoid fluctuations:

Ambient temperature 15.6 to 32.2°C (60 to 90°F)

Storage temperature -40 to 40°C (-40 to 104°F)

•

Allow the following recommended amount of space around the printer for proper ventilation:

Summary of Contents for ineo 3320








































































































































































































































































































Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands

Develop ineo 3320, User Manual

Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands