User's Guide
- 7 -
1—Safety information
Connect the power cord to a properly grounded electrical outlet that is near the product and easily
accessible.
Do not place or use this product near water or wet locations.
CAUTION—SHOCK HAZARD:
Do not use the fax feature during a lightning storm. Do not set up
this product or make any electrical or cabling connections, such as the fax feature, power cord, or
telephone, during a lightning storm.
CAUTION—POTENTIAL INJURY:
To reduce the risk of equipment instability, load each tray
separately. Keep all other trays closed until needed.
Refer service or repairs, other than those described in the user documentation, to a service
representative.
This product is designed, tested, and approved to meet strict global safety standards with the use of
specific manufacturer's components. The safety features of some parts may not always be obvious. The
manufacturer is not responsible for the use of other replacement parts.
CAUTION—SHOCK HAZARD:
Make sure that all external connections (such as Ethernet and
telephone system connections) are properly installed in their marked plug-in ports.
CAUTION—POTENTIAL INJURY:
This product uses a laser. Use of controls or adjustments or
performance of procedures other than those specified herein may result in hazardous radiation exposure.
This product uses a printing process that heats the print media, and the heat may cause the media to
release emissions. You must understand the section in your operating instructions that discusses the
guidelines for selecting print media to avoid the possibility of harmful emissions.
CAUTION—HOT SURFACE:
The inside of the printer might be hot. To reduce the risk of injury from
a hot component, allow the surface to cool before touching.
CAUTION—POTENTIAL INJURY:
The lithium battery in this product is not intended to be
replaced. There is a danger of explosion if a lithium battery is incorrectly replaced. Do not recharge,
disassemble, or incinerate a lithium battery. Discard used lithium batteries according to the
manufacturer's instructions and local regulations.
Use only the telecommunications (RJ-11) cord provided with this product or a 26 AWG or larger
replacement when connecting this product to the public switched telephone network.
CAUTION—POTENTIAL INJURY:
Do not cut, twist, bind, crush, or place heavy objects on the
power cord. Do not subject the power cord to abrasion or stress. Do not pinch the power cord between
objects such as furniture and walls. If any of these things happen, a risk of fire or electrical shock results.
Inspect the power cord regularly for signs of such problems. Remove the power cord from the electrical
outlet before inspecting it.
CAUTION—SHOCK HAZARD:
To avoid the risk of electrical shock when cleaning the exterior of
the printer, unplug the power cord from the electrical outlet and disconnect all cables from the printer
before proceeding.
Summary of Contents for ineo 3320
Page 1: ...User s Guide ineo 3320 ...
