Develop ineo 3320 User Manual Download Page 207

Page: 207 / 295

User's Guide

- 207 -

2. Firmly grasp the jammed paper on each side, and then gently pull it out.

Note:

Make sure all paper fragments are removed.

3. Insert the tray.

[x]-page jam, clear manual feeder. [25y.xx]

1. From the multipurpose feeder, firmly grasp the jammed paper on each side, and then gently pull it out.

Note:

Make sure all paper fragments are removed.

2. Flex the sheets of paper back and forth to loosen them, and then fan them. Do not fold or crease the

paper. Straighten the edges on a level surface.

Summary of Contents for ineo 3320








































































































































































































































































































Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands

Develop ineo 3320, User Manual

Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands