Develop ineo 3320 User Manual Download

Page: 208 / 295

User's Guide

- 208 -

3. Reload paper into the multipurpose feeder.

Note:

Make sure the paper guide lightly rests against the edge of the paper.

[x]-page jam, open automatic feeder top cover. [28y.xx]

1. Remove all original documents from the ADF tray.

Note:

The message is cleared when the pages are removed from the ADF tray.

2. Open the ADF cover.

3. Firmly grasp the jammed paper on each side, and then gently pull it out.

Note:

Make sure all paper fragments are removed.

4. Close the ADF cover.

5. Straighten the edges of the original documents, then load the original documents into the ADF, and

then adjust the paper guide.

Summary of Contents for ineo 3320








































































































































































































































































































Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands

Develop ineo 3320, User Manual

Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands