Develop ineo 3320 User Manual Download Page 279

Page: 279 / 295

User's Guide

- 279 -

Solving scanner problems

•

The scanner does not respond

•

Scan job was not successful

•

Scanner unit does not close

•

Scanning takes too long or freezes the computer

•

Poor scanned image quality

•

Partial document or photo scans

The scanner does not respond

Action

Yes

Step 1

Check if the printer is turned on.

Is the printer turned on?

Go to step 2.

Turn on the printer.

Step 2

Check if the printer cable is securely

attached to the printer and the

computer, print server, option, or

other network device.

Is the printer cable securely attached

to the printer and the computer, print

server, option, or other network

device?

Go to step 3.

Connect the printer cable

securely to the printer and the

computer, print server, option,

or other network device.

Step 3

Check if the power cord is plugged

into the printer and a properly

grounded electrical outlet.

Is the power cord plugged into the

printer and a properly grounded

electrical outlet?

Go to step 4.

Connect the power cord to the

printer and a properly grounded

electrical outlet.

Summary of Contents for ineo 3320








































































































































































































































































































Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands

Develop ineo 3320, User Manual

Search results

Summary of Contents for ineo 3320

Reviews:

Related manuals for ineo 3320

Brands by name

Popular brands