Develop D 16G Service Manual Download Page 89

Page: 89 / 239

D-21

3-5.

Disassembly of the Main Drive Section

(1)

Removal of the Main Motor

1. Remove the Left Cover.

(2)

Removal of the Paper Empty Sensors

1. Remove the Imaging Cartridge.

2. Remove the Front Door.

NOTE

•

The Imaging Cartridge is the Drum Cartridge, to which the Toner Cartridge is mounted.

3. Remove the Left and Right Covers.

☞

D-7

2. Disconnect one connector.

3. Remove two screws, two washers, and the Main

Motor.

4136D010AB

4. Remove the four connectors from the Paper

Take-Up Upper Guide Assy.

4980D015AB

5. Unhook the two tabs, and then remove the Paper

Take-Up Upper Guide Assy.

4980D016AB

Summary of Contents for D 16G















































































































































































































































Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands

Develop D 16G, Service Manual

Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands