Develop D 16G, Service Manual

Page: 124 / 239

S-6
3-2. Utility Mode Setting Procedure
<Procedure>
1. Press the Utility key.
2. The first Utility mode screen appears.
<Exiting Procedure>
• Press the Panel Reset key.
<Changing the Settings for Utility Mode Functions>
1. Press the Zoom Select key, Density Select key or the 10-Key Pad to select the desired
function.
2. Press the Zoom Select key, Density Select key or the 10-Key Pad to select the desired
setting.
3. Press the Yes key to apply the setting.
4. To return to the previous screen, press the No/C key.
(1) Machine Setting
• Various settings for the machine’s operating environment can be specified.
No. Function Purpose Setting Details/Precautions
1
AUTO PANEL
RESET
To specify the time until the auto
panel reset operation is performed
after a copy cycle has been com-
pleted or after the last key opera-
tion. • The default setting is 1
minute.
• OFF
• ON: 0.5 1 2 3 4 5
2
ENERGY
SAVE MODE
To specify the time until the
machine enters Energy Save
mode after a copy cycle has been
completed or after the last key
operation. • The default setting is 15 min-
utes.
The length of time can be set
between 1 and 240 minutes.
3
DENSITY
(ADF)
To specify the scanning density
when using the Automatic Docu-
ment Feeder.
NOTE
• In order to reduce the appear-
ance of spots in copies, the
Automatic Document Feeder
density level is set for lighter
copies as a default.
• The default setting is
“MODE1”.
• MODE 1:
For a lighter copy density in
order to reduce the appear-
ance of spots in copies
• MODE 2:
For printing copies with the
same density as the docu-
ment