Develop D 16G Service Manual Download Page 110

Page: 110 / 239

D-42

1. Start up the host computer, and then insert the CD-ROM into the CD-ROM drive.

2. Turn on the printer.

3. Use a USB cable to connect the printer to the host computer.

4. In the “Install Hardware Device Drivers” dialog box, click the [Next] button, select

“Search for a suitable driver for my device (recommended)”, and then click the [Next]

button again.

5. Select “Specify a location”, and then click the [Browse...] button.

6. Specify “\Corresponding_language\Win9X” on the CD-ROM, and then click the [OK]

button.

7. Click the [OK] button, and then continue following the instructions in the dialog boxes

that appear until the “Completing the Found New Hardware Wizard” dialog box

appears.

8. Click the [Finish] button.

9. When the “Found New Hardware Wizard” dialog box appears again, repeat steps 4

through 8 to install all drivers.

Summary of Contents for D 16G















































































































































































































































Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands

Develop D 16G, Service Manual

Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands