Develop D 16G Service Manual Download Page 173

Page: 173 / 239

T-29

(4)

Image reading system: Black streaks or bands

Step

Check

Result

Action

Is the document damaged or dirty?

YES

Replace the document.

Is the Original Pad dirty?

YES

Clean it.

Does the Original Cover not lie flat?

YES

If the Original Cover is deformed
or the hinges are damaged,
replace the Original Cover.

Is the surface of the Original Glass dirty?

YES

Clean it.

Are the Shading Sheet or back surface
of the Original Glass dirty?

YES

Clean them.

Are the mirror or lens dirty?

YES

Clean them.
Replace the Scanner Assy.

Is the Exposure Lamp dirty?

YES

Clean it.
Replace the Scanner Assy.

Are there no bent connector pins on the
cables connecting the control boards,
are all connectors correctly plugged in,
and are no cables broken?

Correctly plug in the connectors.
Replace connection cables.

4011T017AA

4011T023AA

Summary of Contents for D 16G















































































































































































































































Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands

Develop D 16G, Service Manual

Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands