Develop D 16G Service Manual Download Page 141

Page: 141 / 239

S-23

SECURITY MODE

• This mode is used to set various security functions.

5-1.

Security Mode Function Tree

5-2.

Security Mode Setting Procedure

NOTE
• Be sure to keep the access procedure for the Security mode from any unauthorized per-

sons not involved with service operations.

1. Display the Service mode screen.

☞

S-11

2. Press the Stop key, then the 9 key.

3. The Security mode screen appears.

• Press the Panel Reset key.

(1)

Security

Function

Purpose

Setting Details/Precautions

MACHINE

COUNTER

To enable or disable copying
depending on whether or not the
Mechanical Counter is installed.

• The default setting is

“ENABLE”.

ENABLE

DISABLE

NOTE
• If “ENABLE” is selected,

copying is possible even if
the Mechanical Counter is
not installed.

SECURITY

MACHINE COUNTER

Summary of Contents for D 16G















































































































































































































































Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands

Develop D 16G, Service Manual

Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands