Develop D 16G Service Manual Download Page 138

Page: 138 / 239

S-20

COPY ADF GLASS

AREA

To check for dirt in the scanning
section of the Automatic Document
Feeder.

✽

If spots appear in the copies

<Procedure>
1. Load A4 L or Letter L paper

into Tray1.

2. Press the Start key to start

the “COPY ADF GLASS

AREA” function.

3. Two copy samples are fed

out.

4. Check that no spots appear

in the copy samples.

5. Press the Stop key to stop

the “COPY ADF GLASS

AREA” function.

CCD MOVE TO

HOME

To move the scanner to its home
position in order to secure the
scanner.

✽

When transporting the machine

NOTE
• When transporting the

machine, be sure to move the
scanner to its home position
and secure it with the stopper
at the bottom left of the IR.

SCAN TEST

To check the lighting of the Expo-
sure Lamp and the movement of
the scanner.

✽

If the scanner malfunctions

<Procedure>
1. Press the Start key to begin

the scanner test.

2. Press the Stop key to stop

the scanner test.

Function

Purpose

Setting Details/Precautions

Summary of Contents for D 16G















































































































































































































































Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands

Develop D 16G, Service Manual

Search results

Summary of Contents for D 16G

Reviews:

Related manuals for D 16G

Brands by name

Popular brands