24.7.12
Instruction manual LOCON 24, 48, 64, LTC, TERM 24 and TERM 6 V. 8.8
49
Deutschmann Automation GmbH & Co. KG
Networking terminals with cam controls and PCs
9.5
Connection examples
9.5.1
DICNET link LOCON-TERM
LOCON and TERM are connected as follows via DICNET
Terminal
LOCON
DICNET -
DICNET-
Picture 7: DICNET link terminal - LOCON
The presented devices exemplary stand for Deutschmann terminals and
cam controls of the series LOCON / ROTARNOCK respectively.
The two ground potentials do not have to be interconnected. However, you must ensure that the
GND potential between the individual DICNET bus users does not differ by more than 7 V. Other-
wise, equipotential bonding must be used.
The bus termination resistor must be activated on both units.
Consequently, in the case of simple wiring with a LOCON and an external operator control panel,
it is the obvious choice to use the same 24 V supply for both units.
Summary of Contents for TERM 6
Page 2: ......
