Networking terminals with cam controls and PCs
Deutschmann Automation GmbH & Co. KG
50
Instruction manual LOCON 24, 48, 64 , LTC, TERM 24 and TERM 6 V. 8.8
24.7.12
9.5.2
RS232 link LOCON - TERM
On the RS232 version, only a point-to-point connection between LOCON and the external opera-
tor control panel is possible.
In this case, the Tx LOCON line must be connected to the Rx TERM line of the operator control
unit and vice versa, as can be seen from the illustration below.
The two ground potentials
must
be connected
Picture 8: RS232 link Terminal - LOCON
The presented devices exemplary stand for Deutschmann terminals and
cam controls of the series LOCON / ROTARNOCK respectively.
Summary of Contents for TERM 6
Page 2: ......
