24.7.12
Instruction manual LOCON 24, 48, 64, LTC, TERM 24 and TERM 6 V. 8.8
73
Deutschmann Automation GmbH & Co. KG
Operation via TERM 24
14.4.2
Counting range
You will see the next sub-menu item Counting range by pressing key
or
.
X00 L32 PA000
Count Range: 08192
As already described above, a value can be entered with the digit keys and can be accepted or
skipped by pressing key
.
14.4.3
Zero-point offset
You will see the next sub-menu item Zero-point offset by pressing key
or
:
X00 L32 PA000
Zero Pont: 0
As already described above, a value can be entered with the digit keys and can be accepted or
skipped by pressing key
.
After this, you will see the following menus when you press
(without changing a value) or
pressing
twice (and changing a value). The values can be changed in the same way as
described above using the digit keys.
14.4.4
Reversal
X00 L32 PA000
Rot. of Enc: 0
14.4.5
National language
X00 L32 PA000
Language: 0
Possible languages: 0 = German, 1 = English, 2 = French, 3 = Italian, 4 = Spanish.
For further languages see page 60.
Summary of Contents for TERM 6
Page 2: ......
