Operation via TERM 24
Deutschmann Automation GmbH & Co. KG
72
Instruction manual LOCON 24, 48, 64 , LTC, TERM 24 and TERM 6 V. 8.8
24.7.12
14.3.15 Shift cam track
If
all
cams of one or more outputs are to be shifted, this can be carried out by pressing key
after positioning the cursor to the output field.
You are then prompted to enter how many outputs are to be shifted by how many increments in
what direction.
The outputs in which the cam tracks are to be shifted can be selected in fields 'Axx - Axx'.
By default, the last output selected is proposed. The cursor is positioned to the output with
.
After entering the outputs to be shifted, you can accept this with
. When the cursor is once
again positioned at the symbol for cam track shift
, you can define the shift direction with key
or
. Depending on the direction selected, you will see a
for positive shift or
for
negative shift in the bottom line on the display at the right.
The number of increments to be shifted can be entered using the numerical keypad and con-
firmed with
.
14.4 Initialisation
The Initialisation menu can be chosen in the main menu by pressing key
several times.
I00 L48 PA000
INITIALISATION
Accept the chosen menu item with key
.
You will see the following menu, dependent on the particular unit:
14.4.1
Analog upper range value (only at LOCON 32)
X00 L32 PA000
Analog-End: 0100
The value can be changed accordingly with the digit keys.
Please refer to chapter "Parameter description" provided with the connected cam control for a
description and value ranges for the individual parameters.
Summary of Contents for TERM 6
Page 2: ......
