Operation via TERM 24
Deutschmann Automation GmbH & Co. KG
66
Instruction manual LOCON 24, 48, 64 , LTC, TERM 24 and TERM 6 V. 8.8
24.7.12
The copy process is started with
and it can be aborted with
.
You will see the prompt "Delete program?" if the destination program is not blank.
The stored idle times are also copied when copying the program!
14.3.4
Delete program
If you wish to completely delete the currently selected program, you must press key
whilst
the cursor is positioned at Program.
Clear Program ?
ESC=No, ENT=YES
If the following security query will be confirmed with
a complete deletion of the selected
program will be carried out.
cancels the Delete process.
14.3.5
Select output
The output can be changed by positioning the cursor to Output (Axx).
You can confirm with
and abort with
.
14.3.6
Copy output
All cams of an output can be copied to another output with key
. The cursor must be posi-
tioned at Output, and you are prompted to enter the number of the destination output.
PA000 O01 I000 L64
Copy Outp.: 01 01
You will see the prompt "Delete output?" if the destination output is not blank.
Summary of Contents for TERM 6
Page 2: ......
