System Telephones on the OpenCom 100/OpenCom X300
Display and MenuCards
26
1.4.3 Key Lines
The display next to the keys is assigned to them on a line-by-line basis. Depending
on the type of key, the following display texts are shown. On the OpenPhone 61
the display always shows the active line.
Note:
The call and seizure states are identified by additional
symbols on the call keys. For details, refer to the section en-
titled
Making Calls
starting on page 36.
1
Call key in idle state: internal telephone number or a user-assigned text.
2
Call key during dial and connection state: dialled telephone number.
3
Destination key with names programmed: programmed name.
4
Call key during call state: telephone number (if transmitted) or the name of the
caller (if listed in the telephone book).
5
Function key programmed: name of feature with status display.
6
Destination key with name programmed. If no name was programmed, the
display shows the programmed telephone number instead of the name.
Summary of Contents for OpenPhone61
