DETEWE OpenPhone61 User Manual Download Page 62

Page: 62 / 120

Making Calls

Enquiry, Toggling, Transfer and Conference

Door opener

: You activate the door opener.

2.4.5 Internal/External Three-Party Conference

You have dialled an internal or external enquiry call (see the section entitled

Enquiry/Toggling by means of the R-Key or Another Call Key

starting on page 55).

If the subscriber answers, inform them of the conference and select the

Conference

menu item from the MenuCard

Subscriber on Hold

. The confe-

rence is started.

End the conference by hanging up or pressing the disconnect key (on

the OpenPhone 63 and the OpenPhone 65).

Note:

Interconnecting the two conference participants or

removing one of them from the conference is only possible
using the appropriate menu item in the MenuCard.

If you wish to speak to one of the conference participants separately again or
remove one of them,

press this participant’s call key. You are now speaking with this participant,

while the other participant is put on hold. Now you can toggle again.

End your conversation with this participant by pressing the disconnect

key (or by replacing the handset on the OpenPhone 61) and then press the call key
of the participant on hold.

2.4.6 MenuCard “Conference”

Press (but do not hold down) the MenuCard key

, then select …

Disconnect:ƒ34565483

: This removes an external participant from the confe-

rence.

Disconnect:ƒ1234

: This removes an internal participant from the conference.

Transfer

: This removes you from the conference, while the two other partici-

pants remain connected.

Summary of Contents for OpenPhone61

























































































































Search results

Summary of Contents for OpenPhone61

Reviews:

Related manuals for OpenPhone61

Brands by name

Popular brands

DETEWE OpenPhone61, User Manual

Search results

Summary of Contents for OpenPhone61

Reviews:

Related manuals for OpenPhone61

Brands by name

Popular brands