manualshive.com logo in svg

Detectortesters Testifire 1000, User Manual

Share
Download
Detectortesters Testifire 1000 User Manual Download Page 7

1.  General Instructions

1.1  Warranty

In addition to any other express warranty given in writing by the Company in relation to the Goods, the Company 
warrants that the Goods supplied under these terms and conditions will be in accordance with the specification 
(if any) contained in the Purchase Order, and will be free from defects in workmanship and material for a period of 
18 months from the date of delivery to the Buyer or for a period of 12 months after the date of sale by the Buyer 
to the final customer whichever period is the shorter.  

1.2  Acknowledgement

Testifire

®,

 Solo

™

and Battery Baton

™are registered marks of 

No Climb Products Ltd

.  All other brand 

names mentioned are trademarks or registered marks of their respective holders, and are hereby acknowledged. 
©2010 No Climb Products Ltd.
All Rights Reserved.

1.3  Recycling

The packaging can be easily separated into the following materials:



 

Cardboard (outer box)



Cardboard (inner buffers, boxes)



 

Polyethylene (Capsule bags)



 

Plastic (Capsule caps)

Please dispose in line with local 
environmental requirements.

WEEE (Waste Electrical & Electronic Equipment) Regulations 2006

Testifire and Testifire capsules are suitably marked to be recycled in accordance with your local environmental 
requirements. Alternatively these items may be returned to the manufacturer via your reseller for disposal in 
compliance with WEEE (Waste Electrical & Electronic Equipment) Regulations 2006.

RoHS Declaration

We declare that this product and its associated components are designed and manufactured to be fully compliant 
with the requirements of the Directive 2002/95/EC Restrictions of use of certain Hazardous Substances in 
Electrical and Electronic Equipment (The RoHS Directive).

EULA (End User Licence Agreement)

See Section 10.

page 4

www.

testifire

.com

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

Back to Contents Page

Summary of Contents for Testifire 1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands