manualshive.com logo in svg

Detectortesters Testifire 1000, User Manual

Share
Download
Detectortesters Testifire 1000 User Manual Download Page 38

Testifire 1000: 990g (including Battery Baton)
Testifire 2000: 1.23kg (including Battery Baton)
Solo 760 Battery Baton: 0.5kg

Weights

International Patents

Testifire is protected by the following patents and has patents applied for:

Patents: EP(FR,GB)091055B, DE69820382.8, ZL98120414.7, US6423962, EP(FR,GB)1290661B, DE60112442.1, ZL01801074.1, US6640608, HK1065150, EP(FR,GB)1390927B, 
DE50205116.7, DE60314594.9, GB2385179B, GB2409319B.

Patents Applied for: US10/503745, EP1794728A, WO 2007/015045, WO 2007/060447, GB2432703A 

Testifire 1000: Bellows width: 153mm max. Head Unit height: 224mm max. (397mm including handle)
Testifire 2000: Bellows width: 153mm max. Head Unit height: 273mm max. (397mm including handle)

Dimensions

page 35

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

Note:

 Product specifications may be subject to change without prior notice or obligation on the part of the manufacturer.

www.

testifire

.com

Back to Contents Page

8.1  Field Replaceable Parts

Use only approved accessories that are recommended by the manufacturer for your Testifire model. 
(see Section 9.1)

Testifire does not contain any field serviceable parts. The following spare and consumable parts are available to 
order from your distributor:



TS3 Smoke Capsule 3 pack - TS3-3PACK-001



TS3 Smoke Capsule 6 pack - TS3-6PACK-001



TC3 CO Capsule 3 pack - TC3-3PACK-001



TC3 CO Capsule 6 pack - TC3-6PACK-001



Membrane - SPARE-1049-001



Inner Cup - SPARE-1048-001



USB Cable - SPARE-1047-001



Battery Baton - Solo 760-001



Charger - Solo 726-001

 

Summary of Contents for Testifire 1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands