manualshive.com logo in svg

Detectortesters Testifire 1000, User Manual

Share
Download
Detectortesters Testifire 1000 User Manual Download Page 32

Step 6 

 

This driver may not yet be digitally signed, however it Windows will now 
install the Testifire USB drivers. was obtained from either 
www.testifire.com or the disc Click "Close" to exit the wizard which was 
supplied with your Testifire then it is safe to use on your computer. 

Select "Install this driver software anyway". 

Step 7

Windows will now install the Testifire USB drivers. Click "Close" to exit 
the wizard. 

Step 3

 

Select "I don't have the disc. Show me other options." 

Step 4 

Select "Browse my computer for driver software". 

Step 5

 

The USB drivers are located in the install directory of the Testifire Flash 
Loader application. 

This would usually be C:\Program Files\Testifire\Testifire Flash 
Loader\USB Drivers 

Use the "Browse" button to select the directory where the drivers are 
located then click "Next". 

page 29

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

www.

testifire

.com

Back to Contents Page

Summary of Contents for Testifire 1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands