manualshive.com logo in svg

Detectortesters Testifire 1000, User Manual

Share
Download
Detectortesters Testifire 1000 User Manual Download Page 31

7.7 Testifire Flash Loader Software Instructions

For Testifire 1000 & 2000 Models 

       Welcome to the Testifire Flash Loader Software

 

Before connecting Testifire to the computer, first install the Flash Loader software. 

Introduction

 

Testifire Flash Loader is a free Windows based application that allows you to update your Testifire firmware on your Testifire without the need to return it for 
service. 

The Flash Loader allows the user to upgrade Testifire to the latest firmware version via the computers USB port. 

Before you can use the Testifire Flash Loader to update the firmware on your Testifire unit, you must first install the application and Testifire USB drivers. 
See the Installation instructions below. 

The Testifire Flash Loader is intended to be used on a PC that is connected to the internet. It can be used without an Internet Connection as long as you have 
previously downloaded the appropriate Firmware binary file (this for advanced users). See www.testifire.com/site/technical/ 

PLEASE READ THE INSTRUCTIONS BEFORE STARTING THE INSTALLATION.

 

What is Firmware? 

Firmware is a computer program that is embedded in a hardware device, in this case Testifire. 

Why are updates required? 

A Testifire Firmware update could provide either additional functionality and/or enhancements to existing features. 

Requirements

 

Testifire Flash Loader Software 
Testifire USB Cable (A to mini B) -Part No: EA36176 
Fully charged battery 
Internet Connection * 

Supported

 

Windows 2000 Professional 
Windows XP x32 
Windows Vista x32 
USB V1.1 and USB V2.0 

* The Testifire Flash Loader has an automatic feature that allows it to connect to the Internet and download the latest Testifire firmware version. To enable it to this 
you must have a working internet connection. 
Advanced users may manually download a Testifire firmware binary file and manually apply without having access to the internet. 

Windows Vista -Testifire Device Driver Installation

 

Step 1

 

Run the Flash Loader software and when prompted connect Testifire to the computer using the 
supplied USB cable. 

The "Found New Hardware" wizard will launch. 

Step 2

 

Select "Locate and install driver software". 

If the User Account control window appears, "Windows need your permission to continue", select 
continue. 

page 28

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

www.

testifire

.com

Back to Contents Page

Summary of Contents for Testifire 1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands