manualshive.com logo in svg

Detectortesters Testifire 1000, User Manual

Share
Download
Detectortesters Testifire 1000 User Manual Download Page 34

Step 1 

Run the Flash Loader software and when prompted connect Testifire to 
the computer using the supplied USB cable. 
The "Found New Hardware" wizard will launch. 

Step 2 

Click "Next" to continue.

Step 3 

Select "Search for a suitable driver for my device" then click "Next" to 
continue.

Step 4 

Select "Specify a location" then click "Next" to continue. 

page 31

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

www.

testifire

.com

Back to Contents Page

Step 5 

The USB drivers are located in the install directory of the Testifire Flash 
Loader application. 

This would usually be C:\Program Files\Testifire\Testifire Flash 
Loader\USB Drivers. 

Use the "Browse" button to select the directory where the drivers are 
located then click "OK". 

Step 6

 

The Testifire driver should be identified. Click "Next" to install.

Step 7 

The Testifire driver should be identified. Click "Next" to install. 

Windows 2000 - Testifire Device Driver Installation

Summary of Contents for Testifire 1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands