Fig. 24
page 12
Fig. 23
M U L T I - S T I M U L U S D E T E C T O R T E S T E R
testifire
®
www.
testifire
.com
Back to Contents Page
4.7
Testing High Profile Detectors
When testing high profile detectors, it may be necessary
to remove the inner clear cup to enable the detector to
sit in the correct position for a successful test. The inner
clear cup has a semi-circular cut-out on the side nearest
to the user interface. Place your finger in the cut-out and
carefully lift out the cup (Fig. 23). This will allow for
correct positioning of the high profile detector within
the cup (Fig. 24).
:
To prevent Testifire going straight into a test mode, both the inner and outer clear cups should cleaned
TIP
regularly with a damp non-abrasive cloth to remove any deposits or finger marks.
