manualshive.com logo in svg

Detectortesters Testifire 1000, User Manual

Share
Download
Detectortesters Testifire 1000 User Manual Download Page 27

page 18

6.3 Error Messages and Indicating LED Reference Chart

If the ‘Status’ LED is flashing 
you need to recharge or replace 
the Battery Baton soon.

If the ‘Status’ LED is solid red, 
you must recharge or replace the 
Battery Baton immediately.

page 24

    Replace Battery

A problem has occurred with the 
Smoke Fan.

If the error continues, contact your 
regional service centre to arrange 
for repair of the fault.

  SYSTEM FAULT

      Smoke Fan

A problem has occurred with the
Heat Fan.

If the error continues, contact your 
regional service centre to arrange 
for repair of the fault.

   SYSTEM FAULT

       Heat Fan

A problem has occurred with the 
CO Fan.

If the error continues, contact your 
regional service centre to arrange 
for repair of the fault.

  SYSTEM FAULT

        CO Fan

A problem has occurred with the 
Clearing Fan.

If the error continues, contact your 
regional service centre to arrange 
for repair of the fault.

  SYSTEM FAULT

     Clearing Fan

A problem has occurred with the 
Chassis Fan.

If the error continues, contact your 
regional service centre to arrange 
for repair of the fault.

  SYSTEM FAULT

     Chassis Fan

The CO element is too hot.

Power off and leave too cool for
5 minutes. Power on and try the
same test again.

If the same message is displayed, 
contact your regional service 
centre to repair the fault.

  SYSTEM FAULT

      CO Element
        Too Hot

A problem has occurred with the 
CO Module.

Contact your regional service 
centre to arrange for repair of
the fault.

  SYSTEM FAULT

      CO Module
        

Capsule not installed. 

Reseat capsule (if installed) or install 
a new capsule.

           CO

        Capsule
    Not Detected
        

Note:

 If a problem occurs with your Testifire unit, the ‘Status’ LED will flash or remain on in red and the ‘Test Type’ 

LED will not be illuminated. The error message will be displayed on the screen.

M U L T I - S T I M U L U S   D E T E C T O R  T E S T E R

testifire

®

               CO

        Capsule Empty
    
        

             Smoke
            Capsule
         Data Invalid
    
        

             Smoke
            Capsule
          Read Error
    
        

Capsule Error Messages
(Smoke and CO):

Capsule damaged or not seated 
correctly.

Reseat capsule. 

If the error persists, replace capsule.

Capsule empty.

Install a new capsule.

Capsule damaged or not seated 
correctly.

Reseat capsule. 

If the error persists, replace capsule.

www.

testifire

.com

Back to Contents Page

A problem has occurred with the 
Heat Module.

Contact your regional service 
centre to arrange for repair of
the fault.

  SYSTEM FAULT

     Heat Module
        

Summary of Contents for Testifire 1000












































Reviews:

No comments

Brands by name

Popular brands

Load more brands