30
Touch <Oxide Firing 980 °C>.
The current parameters settings are displayed
in the right-hand window.
Touch <Start>.
The program sequence will begin.
There are three display modes to visualize the progress of program:
Touch
or
to switch between the display modes.
At the end, a message window will indicate
the completion of the entire program.
Touch <OK> to confirm.
These parameters can be changed before and
after starting the program, provided the pro-
gram is not running yet.
Parameters in predefined programs can only be
changed for the current procedure; the changes
cannot be saved.
To save parameter changes permanently
in “My Programs”:
Touch
.
Left-hand window: Progress
of the individual parameters.
Right-hand window: Overall
progress and remaining time.
In these two display modes, the individual parameters
(program phases) are symbolized by boxes:
White frame: Program phase not yet started.
Blue flashing frame: Program phase is being executed.
Green frame: Program phase completed.
4.6.2 Start firing or pressing program
Summary of Contents for Multimat Cube
Page 1: ...Instruction Manual Multimat Cube Multimat Cube press...
Page 39: ...39...
