Dentsply Sirona Multimat Cube, Instruction Manual

Page: 21 / 40

21
4.5.4 <Standby mode> field
The standby function ensures a constant temperature in the firing chamber and prevents the accumulation
of moisture in the chamber insulation.
Switch to standby mode manually:
Touch in the main menu.
Turn automatic standby mode on or off:
<Settings> menu <General> <Automatic standby (ON/OFF).
Change standby temperature:
<Settings> menu <Furnace> <Standby temperature>.
4.5.5 <Fast cooling>
The fast cooling function cools down the firing chamber to the base temperature. This function requires
a connected vacuum pump.
Start fast cooling:
Touch .
The firing chamber will be lifted, and the vacuum pump will run until the base temperature is reached.
4.5.6 <File Manager> menu
General notes:
• Predefined programs cannot be edited or deleted.
• Predefined programs can be copied to <My Programs> and edited.
• Brennprogramme:
– Predefined firing programs are bright red and marked with the symbol.
They are locked for permanent editing.
– Own firing programs are dark red and marked with the symbol.
These programs can be customized
• Pressing programs (Multimat® Cube press only):
– Predefined pressing programs are bright blue and marked with the symbol.
They are locked for permanent editing.
– Own pressing programs are dark blue and marked with the symbol.
These programs can be customized.