13
4.2.2 Initial configuration
Selecting your language:
The available languages are represented by the
respective national flags.
Swipe to the left or right on the screen until
the desired flag appears in the centre and
touch the flag once.
Touch
to proceed with the initial
configuration.
Press
to open the chamber for inserting the
firing base or pressing base*.
*Multimat® Cube press only
Place the firing base or pressing base*
in the middle of the firing base carrier (1).
*Multimat® Cube press only
Attach the magnetic firing supports to
the unit (2).
Touch
to close the chamber.
Touch
to proceed with the initial
configuration.
WARNING
The magnetic firing supports pose a
hazard to wearers of implanted devices.
Keep the magnetic firing support at
least 10 cm away from the upper body.
NOTICE
Severe damage to the unit will
result if you attempt to commission it
without the firing base or pressing base*.
2
1
2
Summary of Contents for Multimat Cube
Page 1: ...Instruction Manual Multimat Cube Multimat Cube press...
Page 39: ...39...
