Dentsply Sirona Multimat Cube, Instruction Manual

Page: 10 / 40

10
3 Unpacking and commissioning
3.1 Unpacking the unit
Check the Shockwatch® indicator on the packaging. If it has turned red, the impact energy during transport
was higher than allowed, and the unit may be damaged. In this event, follow the instructions on the Shock-
watch® sticker.
Open the packaging.
Inside the outer packaging, an upper and a lower PE foam shell protects the unit from damage in transit.
Remove the upper PE foam shell.
The lower PE foam tray has transport handles on the left and right.
Remove the unit from its packaging (use 2 persons to lift) by the transport handles provided for this purpose.
Remove the accessories from the packaging.
WARNING
The magnetic firing supports pose a hazard to wearers of implanted devices.
Keep the magnetic firing support at least 10 cm away from the upper body.
3.2 Inspecting the shipment
Scope of delivery:
• Ceramic furnace Multimat® Cube or Multimat® Cubepress
• Mains cable with hot-appliance coupler
• Pressing base (Multimat® Cubepress only).
• Brennsockel (nur (Multimat® Cube)
• Firing base carrier
• Firing supports (2)
• Grip tool
• Compressed-air supply hose (Multimat® Cubepress only)
• Compressed-air adapter (Multimat® Cubepress 100–120 V only
• Calibration set
• USB stick, including the user manual in several languages
• Quick Guide
WARNING
Risk of injury from damaged parts.
• After unpacking, inspect the shipment for completeness and any damage.
Do not put connect or operate the unit if it is damaged or if any components are missing.
• Contact Dentsply Sirona.