29
4.6.2 Start firing or pressing program
The following <Firing with Oxide Firing 980°C> is an illustrative example of how to execute
a firing program or pressing programs (Multimat® Cube press only).
The screenshots were taken with slide mode “ON”:
Menu <Settings>
<General>
<Slide mode>.
Place the object to be fired in the centre
of the firing base or pressing base*.
*Multimat® Cube press only.
Swipe to the left or right on the screen until the
<Oxide firings> group appears in the centre.
Touch <Oxide firings>.
Touch <Firing> to access the subgroups.
Touch <Predefined> to access the subgroup
that includes the oxide firing programs.
Summary of Contents for Multimat Cube
Page 1: ...Instruction Manual Multimat Cube Multimat Cube press...
Page 39: ...39...
