Dentsply Sirona Multimat Cube, Instruction Manual

Page: 5 / 40

5
1.4 Operator obligations
Precautions for which the operator is responsible:
• Ensuring the proper use of the unit according to this operating manual and prevention of misuse.
• Obtaining the required operating licence from the competent authorities and following all applicable laws
and regulations, e.g. with regard to:
– Personnel safety
– Material safety
– Waste disposal
• Operation of the unit by qualified personnel.
• Operation of the unit by personnel to be trained, instructed, instructed or undergoing training only to be
carried out under the constant supervision of a qualified person.
• Definition of the responsibilities of staff members for commissioning, operation, cleaning, troubleshooting
and maintenance.
• Verified availability, legibility and completeness of the instruction manual at the point of use.
• Staff instructions according to the requirements laid down in the instruction manual.
• Compliance with all warnings and safety instructions.
• Compliance with service instructions shown on the unit’s display.
• Service and repair work carried out by Dentsply Sirona or by qualified personnel authorized
by Dentsply Sirona.
• Exclusive use of original spare parts.
• Dentsply Sirona recommends a technical inspection of the unit to be performed by Dentsply Sirona every 12
months in order to maintain the unit’s firing quality/pressing quality (Multimat® Cube press only) at a high level.
1.5 Safety symbols on the device
CAUTION
Burns hazards when
touching hot surfaces.
Do not touch surfaces.
WARNING
Deadly electrical voltage.
Maximum power consumption of
the vacuum pump: 2.5 A (100–120 V)
or 1.0 A (220–230 V).
Use the IEC cold-appliance socket for
connecting the vacuum pump only.
WARNING
The magnetic firing supports pose a
hazard to wearers of implanted devices.
Keep the magnetic firing support at
least 10 cm away from the upper body.
0
20
100
120
140
2
8
10 bar
psi