Chapter 2 Configuration of the Robot System
7
2.2.3 Warning and Caution Labels
The robot unit has warning and caution labels pasted as shown below. They alert the
user to the dangers of the areas on which they are pasted. Be sure to observe the
instructions printed on those labels.
Warning and Caution Labels on the Robot Unit
Location of labels
Warning and caution labels on the
robot unit
Additional description
Label 1
Contact with the robot unit which is in motion can cause serious
injuries. Observe the following:
(1) Never enter the robot's restricted space when the robot is in
motion or the motor power is on.
(2) When you need to enter the robot's restricted space for recovery
from robot failures, be sure to cut the power to the robot motors
by activating an emergency stop device or the like.
Label 2
(on UL-Listed robot units only)
When the controller power is on, pressing the brake release switch
causes the Z axis to fall. It is DANGEROUS. Observe the following:
(1) Never press the brake release switch except in an emergency.
(2) Before pressing the brake release switch, be sure to check that
there is no danger of injuries or damages on equipment.
Label 3
There is a high voltage part.
This label alerts the user to the dangers of electrical shocks.
Label 4
Instructions on how to hold the robot unit for transport.
Summary of Contents for HS-4535G
