- 49 -
[3], [4], [5] ITF, STF and CODABAR
The minimum number of digits to be read for ITF, STF and CODABAR is selectable.
Setting smaller numbers for each code increases probability of missing digits or misreading, depending on
various factors such as barcode reading conditions and barcode quality. Setting larger numbers for each code
decreases probability of missing digits or misreading. Select only the required number to reduce the probability
of missing digits or misreading.
Read code
Range
Default
ITF
2 to 20
4
STF
1 to 20
3
CODABAR
3 to 20
4
Scanner menu for BHT-1300Q Series
[1] INVERT
Enables or disables inverted codes to be read.
[2] REVERSE
Enables** or disables mirror image codes to be read.
[3] DECODE LEVEL
Selects the decode level.
[4] LIGHT
Sets the light mode.
[5] SCAN MODE
Selects the scan mode either “NORMAL” or “POINT”.
[6] MARKER
Sets the laser light marker illumination.
[7] OPTION DATA
Enables or disable the optional data to be added to the
end of 2D code data read.
[8] MINIMUM DIGITS Select the minimum number of digits to be read for
each code.
[9] Read Parameter
Launches the menu for the scanner reading
parameter. Refer to “6.10 Scanner Reading
Parameters” for details.
[1] INVERT (Black-and-white inverted code reading function)
Enables or disables inverted codes to be read.
Select one from the following three choices.
NORMAL
: Reads only normal code. (default)
INVERT
: Reads only inverted code.
AUTO
*:
Reads both types of codes. (automatic detection)
Note
Setting to the AUTO may take more time to read codes than setting to NORMAL or
INVERT.
