- 53 -
andby
.
ouble tap the
Power Management
icon in the System Properties to open the Power
There will be a time delay of a few s conds when automatically turning off the power after the specified time
hen the “Enable automatic power off with wireless communication” is checked, the power turns OFF
- When automatic power-off time is set to 0: The power does not automatically turn OFF.
Point
The power does not turn OFF for 10 seconds once the power turns ON.
andby
.
ouble tap the
Power Management
icon in the System Properties to open the Power
There will be a time delay of a few s conds when automatically turning off the power after the specified time
hen the “Enable automatic power off with wireless communication” is checked, the power turns OFF
- When automatic power-off time is set to 0: The power does not automatically turn OFF.
Point
The power does not turn OFF for 10 seconds once the power turns ON.
6.4.3. Power Management
The Power Management menu is used to set the automatic power-off timer and st
timer
The Power Management menu is used to set the automatic power-off timer and st
timer
D
D
Management menu.
The default values are given in parentheses.
Management menu.
The default values are given in parentheses.
.4.3. Power Management
Automatic Power off Time:
Selects the automatic power-off time from 0 to
.
600 seconds, while the BHT is not set in the CU
The power does not automatically turn OFF when
“0” is set.
Battery Power(sec):(180)
External Power(sec): (0)
automatic power-off time from 0 to
n
Selects the
1800 seconds, while the BHT is set in the CU.
The power does not automatically turn OFF whe
“0” is set, or while communicating via a LAN (the
Power/Communication LED in the CU is flashing.)
ee
has elapsed.
has elapsed.
W
W
automatically even during wireless communication. Refer to the following information.
automatically even during wireless communication. Refer to the following information.
- When automatic power-off time is set to a non-zero value:
- When automatic power-off time is set to a non-zero value:
While the wireless device is open.
While closing the wireless device.
During communication via a CU.
Checked
The power automatically turns OFF
Unchecked
The power does NOT turn OFF
The power turns OFF automatically.
The power does NOT
.
automatically
Turn OFF automatically
Switch to Standby Mode
:
to be switched to the standby mode in 100ms units.
Value Description
Timer (x 100 ms):
Sets the waiting time
(10: 100ms x 10 = 1 second)
0
Disable the standby mode
1 to 9
1 second
10 to 600
nds
1 to 60 seco
System Properties
