- 124 -
Menu
ap “4:Test” in the System Menu.
eeper scale test.
: COM:
Performs
a
communication
test.
: DISPLAY:
Performs an LCD and indicator LED test.
: KEY VIBRATION:
Performs a key entry and vibrator test.
Note
Contact your sales dealer if an error occurs during the above
6.11. Test
The Test menu is used to perform the following hardware tests for the
BHT. To open the Test menu, t
1:SCANNER:
Performs a barcode scanning test.
2:
BEEPER:
Performs a b
3: AGI
ing
test.
NG:
Performs
an
ag
4
5
6
tests.
6.11.1. Code Scanning Test
Tap the
1: SCANNER
bu
displayed. Then scan a
shown on the screen.
tton in the T
The screen shown below is
n actual code
d data matches with the data
When a code is scanned, the LED indicator illuminates in blue, and the beeper sounds once.
ned code type, number of digits and scanned data are displayed in the screen.
er of digits a
de Mark TYPE2
layed as characters.
y depending on the code types as shown in the Code mark list.
est menu to perform a code scanning test.
with the BHT, and confirm that the scanne
Code Mark (TYPE1)
Code M
Code Mark (TYPE2)
Number of digits
ark (TYPE1)
Code Mark (TYPE2)
Number of digits
The scan
The code type and numb
Code Mark TYPE1
(
Co
The scanned codes are disp
The characters displayed on the screen var
re displayed in the order shown below.
)
number of digits
Scanned data
Scanned data
Read Parameter
button:
BHT-1300B
BHT-1300Q
Opens the scanner
reading parameter
menu. (refer to "6.10.
Scanner Reading
Parameters".)
